NBase Communications NH2001M Installation And User Manual
                                                                        | |
Contents
| 
47NH 2001MNBase CommunicationsPort Monitoringset-mon-portThis command sets the monitoring port (port containing the monitoringdevice, sniffer port). All traffic from the port specified by the monitor com-mand will be duplicated onport. port is a decimal port number.Usage:set-mon-port <port>monitorThis command sets the port to be monitored and starts the monitoring process.port is a decimal port number. All traffic from this port will be duplicated onthe monitoring port specified by the set-mon-port command. The monitoringdevice or sniffer must be connected to the monitoring port before monitoringis activated.Usage:monitor <port>stop-monThis command ends port monitoring.get-nv-monThis command retrieves the port monitoring information stored by the save-mon command in the NVRAM.save-monThis command saves the current port monitoring information (including set-mon-port and monitor commands) into the NVRAM, so that the monitoringwill be restarted upon device reset.clear-nv-monThis command clears the port monitoring information previously stored in theNVRAM with the save-mon command.AI2001SB.QXD 4/5/98 11:27 AM Page 47 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine