60NH 2001M NBase CommunicationsIP Setup1. Modify the system IP configuration to match your IP network. Use theset-ip-cfg command in order to provide an IP address, a netmask and abroadcast address (see IP Commands).For example:set-ip-cfg 129.1.1.64 255.255.255.0 129.1.1.0Check that the actual IP configuration matches the desired one:SYS_console> get-ip-cfgThe device IP address, netmask and broadcast are:IP address : 129.001.001.064IP netmask : 255.255.255.000IP broadcast : 129.001.001.0002. Set the default gateway address using the set-gatew command. This shouldbe a station that can route IP packets to non-local IP networks.For example:SYS_console> set-gatew 129.1.1.1Confirm that the default gateway IP address was properly accepted:SYS_console> get-gatewDevice default gateway address is : 129.001.001.001AI2001SB.QXD 4/5/98 11:27 AM Page 60
