7197 Owner’s Manual Chapter 2: Setting Up and Using the Printer10 March 2002Repacking the PrinterReview the illustrations on the previous two pages to pack the printer.1. Place receipt paper between the receipt cover and the print head for protection.2. Place the printer in the plastic bag and foam pack, place the packed printer in thebox, and secure the box with packing tape.3. If you are sending the printer to NCR for repair, call your NCR-authorized servicerepresentative for instructions on where to send the printer.Be prepared to answer questions concerning shipping and billing.Choosing a LocationThe 7197 printer takes up relatively little counter space and may be set on or near thehost computer. Make sure there is enough room to open the receipt cover to change thepaper. The illustration shows the actual dimensions of the printer, but leave severalinches around the printer for connecting and accessing the cables.183.50 mm(7.30 in.)145.50 mm(5.80 in.)155.50 mm(6.20 in.)
