READY — SET — GOUNPACKINGIf you haven’t finished unpacking your computer and the peripherals,do it now.1. Remove the computer from the box. Save the box and the packingto use in any future moves. Refer to your Getting Started bookletfor instructions.2. If any damage to the computer or peripherals is visible, report itimmediately to your dealer or NCR representative.3. Remove the tabbed inserts in the drives and save these with theboxes (see Figure 2-1).4. Arrange the components on your workspace in an order comfortable to your use.5. Make sure the power switch on the front of your computer is in theOFF position before you plug in the power cord (see Figure 2-2).Figure 2-1 Remove Tabbed Inserts From Drives2-2 OWNER S MANUAL