OPTIONS INSTALLATION2. Grasp the card rack at both sides and carefully pull out two tothree inches from the cabinet. (NOTE: The card rack must bepulled away from the cabinet a few inches to allow clearance forthe cabinet top.)3. With a screwdriver, remove the two screws in the lower back ofthe cabinet (see Figure 3-1).4. Grasp the cabinet top at both sides, with a slightly outward pull,slide the top off toward the rear.5 T,av the cabinet top to the side out of the way.Figure 3-1 Cabinet RemovalCard Rack Assembly Removal1. Make a note of their positions, and disconnect any cables thatmay be connected to the exterior of the card rack assembly. (SeeFigure 3-8.)2. Turn the screw-lock that secures the card rack assembly 90degrees counter-clockwise (see Figure 3-2).3-2 OWNER S MANUAL
