Reviewing System Features 1-17! Intel LANDeskÆ Client ManagerUse LANDesk software to track system information such as serialnumber, BIOS version, memory capacity, disk capacity, expansionboard settings, and applications. Use LANDesk software for remotestarts from a server computer using Wake-On LAN and remote reboot.NEC Product Recovery CDYour system comes with an NEC Product Recovery CD and PowerMateRecovery Boot diskette. Should a problem occur that causes data loss orcorruption, you can use the NEC Product Recovery CD to restore thesystem to its original factory state or you can restore just the operatingsystem and drivers. A full system restore loads the operating system andall the factory-supplied software that comes on the hard drive. SeeìProduct Recoveryî in Chapter 3 for information about using the restoreoptions.PowerMate Application and Driver CDUse the PowerMate Application and Driver CD to install drivers for NECsystem options that are not part of the factory configuration. Also use thePowerMate Application and Driver CD to reinstall NECC-suppliedsoftware. See ìPowerMate Application and Driver CDî in Chapter 3 forinformation about installing drivers from the CD.SecurityThe system has hardware, software, and mechanical security features thatoffer protection against unauthorized access to your system and data. Thefollowing security features are available with the system.! Password SecurityThe BIOS Setup utility includes a feature that lets you set a user orsupervisor password, or both.The user password controls booting of the system and controls accessto the Setup Utility and the keyboard. (User access to the BIOS SetupUtility is limited to a subset of all BIOS Setup parameters when asupervisor password has been set.)The supervisor password allows full access to the system and theBIOS.