3-36 Configuring the SystemRestoration ProcessOnce you have selected the programs or hardware settings you want torestore, click OK to start the restoration process.Each application or device you selected runs through its installationprocedure. Continue as with a normal installation, selecting the optionsyou want. Each time the application asks you if you wish to restart yoursystem, select Yes to ensure all registry information is correct for the nextinstallation.When all the selected programs or devices are installed, remove theProduct Recovery CD and store it in a safe place.PowerMate Application and Driver CDThe PowerMate Application and Driver CD provides drivers forperipheral equipment that you may purchase for use with your PowerMatesystem. The equipment and the drivers are fully tested by NECC to ensuretheir compatibility with the PowerMate system. If you need drivers forperipheral devices you are adding to your system, use this CD.The PowerMate Application and Driver CD is easy to use. Start thesystem, and then insert the PowerMate Application and Driver CD intothe CD drive. Follow the on-screen prompts to install the required drivers.System Board Jumper SettingsThe system has an easily accessible jumper for clearing your password ifyou forgot it.If you need to clear your password, set the jumper as follows.1. Wake a system in sleep mode, save and close any open applications,close Windows, power down, and unplug the systemís AC poweradapter and any external options.To prevent damage to the system board, do notclear your password while power is on.
