22Setting high definition images to the suitablescreen sizeUse this procedure to set whether the number of verticallines of the input high definition image is 1035 or 1080.Example: Setting the “1080B” mode to “1035I”On “HD SELECT” of “OPTION1” menu, select “1035I”.OPTION1 1 / 3EXITOSMBNC INPUTD-SUB INPUTRGB SELECTHD SELECTINPUT SKIPALL RESETNEXT PAGE: RGB: RGB: AUTO: 1035 I: OFF: OFFSEL. RETURNADJ.Information HD SELECT modesThese 3 modes are not displayed in correct imageautomatically.1080B: Standard digital broadcasts1035I: Japanese “High Vision” signal format1080A: Special Digital broadcasts (for example :DTC100)Setting the Input SkipWhen this is ON, signals which are not present will beskipped over and only pictures whose signals are beingtransmitted will be displayed.This setting is valid only for the INPUT SELECT buttonon the unit.Example: Set to “ON”On “INPUT SKIP” of “OPTION1” menu, select “ON”.OPTION1 1 / 3EXITOSMBNC INPUTD-SUB INPUTRGB SELECTHD SELECTINPUT SKIPALL RESETNEXT PAGE: RGB: RGB: AUTO: 1080B: ON: OFFSEL. RETURNADJ.Information INPUT SKIP settingsOFF: Regardless of the presence of the signal, scanand display all signals.ON: If no input signal is present, skip that signal.* “SETTING NOW” will appear during the input search.Resetting to the default valuesUse these operations to restore all the settings (PICTURE,AUDIO, IMAGE ADJUST, OPTION1~3, etc) to thefactory default values.Refer to page 16 for items to be reset.On “ALL RESET” of “OPTION1” menu, select “ON”, thenpress the MENU/ENTER button.OPTION1 1 / 3EXITOSMBNC INPUTD-SUB INPUTRGB SELECTHD SELECTINPUT SKIPALL RESETNEXT PAGE: RGB: RGB: AUTO: 1080B: OFF: ONSEL. RETURNMENU/ENTER OKALL RESETSETTING NOWWhen the “SETTING NOW” screen disappears, then all thesettings are restored to the default values.WIDE1: When an 852 dot 480 line signal with ahorizontal frequency of 31.7kHz is input, the image maybe compressed horizontally. To prevent this, set RGBSELECT to WIDE1.WIDE2: When an 848 dot 480 line signal with ahorizontal frequency of 31.0 kHz is input, the imagemay be compressed horizontally. To prevent this, setRGB SELECT to WIDE2.WIDE3: When an 1920 dot 1200 line signal with ahorizontal frequency of 74.0 kHz is input, the imagemay be compressed horizontally. To prevent this, setRGB SELECT to WIDE3.DTV: Set this mode when watching digital broadcasting(480P).See page 7 of Model Information for the details of theabove settings.