NEC 42 VP5 VM5 Operation Manual

Also see for PlasmaSync 42XM3: Supplementary guide Installation guide Supplementary guide Brochure Brochure

Contents

NEC 42 VP5 VM5 Operation Manual Manual pdf 26 page image

26Setting the screen size for S1/S2 video inputIf the S-video signal contains screen size information, theimage will be automatically adjusted to fit the screen whenthis S1/S2 is set to AUTO.This feature is available only when an S-video signal isinput via the VIDEO3 terminal.Example: Setting “S1/S2” to “AUTO”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “S1/S2” of “OPTION2” menu, select “AUTO”.OPTION2 2 / 3EXITPREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2DVI SET UPCLOSECAPTIONCAPTION CONTNEXT PAGE: OFF: ON: 3: AUTO: OFF: LOWSEL. RETURNADJ.Information S1/S2 settingsAUTO: Adjusts the screen size automatically accordingto the S1/S2 video signal.OFF: Turns the S1/S2 function off.Setting the signal and black level for DVIsignalChoose the signal for the DVI connector (PC or STB/DVD) and set the black level.Example: Setting the “PLUG/PLAY” mode to “STB/DVD”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “OPTION2” menu, select “DVI SET UP”, then press theMENU/ENTER button.The “DVI SET UP” screen appears.On “PLUG/PLAY” of “DVI SET UP” menu, select “STB/DVD”.DVI SET UPEXITPLUG/PLAYBLACK LEVEL: STB/DVD: HIGHSEL. RETURNADJ.Information PLUG/PLAY settingsPC: When connected to the PC signal.BLACK LEVEL is set to “LOW” automatically.STB/DVD: When connected to the SET TOP BOX,DVD etc.BLACK LEVEL is set to “HIGH” automatically. BLACK LEVEL settingsLOW: When connected to the PC signal.HIGH: When connected to the SET TOP BOX, DVDetc. Change “HIGH” into “LOW” if the black levelappears gray.Setting CloseCaptionChoose the closed caption mode that allows text to besuperimposed on display.Example: Setting “CLOSECAPTION” to “CC2”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “CLOSECAPTION” of “OPTION2” menu, select“CC2”.OPTION2 2 / 3EXITPREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2DVI SET UPCLOSECAPTIONCAPTION CONTNEXT PAGE: OFF: ON: 3: OFF: CC2: LOWSEL. RETURNADJ.Information CLOSECAPTION settingsOFF: This exits the closed caption mode.CC1~4: Text is superimposed.TEXT1~4: Text is displayed in full screen.A closed caption signal may not be decoded in thefollowing signature;1. when a video tape has been dubbed.2. when the signal reception is weak.3. when the signal reception is nonstandard.When using closed captioned channel or the text mode,the text screen always appears.When there is no signal, however, the text screen willnot display text characters.Setting the contrast of CloseCaptionChoose the brightness of the closed caption.Example: Setting “CAPTION CONT” to “NORMAL”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “CAPTION CONT” of “OPTION2” menu, select“NORMAL”.OPTION2 2 / 3EXITPREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2DVI SET UPCLOSECAPTIONCAPTION CONTNEXT PAGE: OFF: ON: 3: OFF: OFF: NORMALSEL. RETURNADJ.Information CAPTION CONT settingsNORMAL: Closed Caption brightness is set to normal.LOW: Closed Caption brightness is set to lower.