NEC DS1000 Product Description

Also see for DS2000 IntraMail: User guide Feature handbook User guide Feature handbook Feature handbook

Contents

NEC DS1000 Product Description Manual pdf 41 page image

Section 3: FeaturesDS1000/2000 Product Description Section 3: Features 333Station Message Detail Recording05/07/1999 09:10P---+---+--------------------------------+----------+---------+--------+---Sta|Lin| Number Dialed | Account | Start |Duration| T---+---+--------------------------------+----------+---------+--------+---301| 02| 2139261000| |11:11:39A|00:01:13|IN301| 02| ANDERSON ALLEN| |11:11:39A|00:01:13|IN301| 02| Private Number| |09:12:13P|00:01:12|IN301| 02| Out of Area Number| |09:12:07P|00:01:20|INCaller ID Integration with Voice MailCaller ID fully integrates with NVM-Series Voice Mail systems. This enables Voice Mail featuressuch as Make Call with Caller ID. Make Call allows the Voice Mail subscriber to return a call tosomeone who left them a message without knowing the calling party’s phone number.Second Call Caller ID (Extension Level Call Waiting Caller ID)While a display keyset user is busy on a call, the system can show the Caller ID information for awaiting call. If the busy extension is programmed to receive Camp On tones or Off-Hook Ringingfrom the waiting call, the system will send the Caller ID data to the busy telephone’s display. If thebusy extension does not receive Camp On tones or Off-Hook Ringing, it will also not receive thewaiting call’s Caller ID. (Note that Caller ID data from a Camp On is displayed only once, corre-sponding to the single Camp On beep.)Third Party Caller ID CheckThird Party Caller ID Check allows a keyset user to display the Caller ID data for another trunk.The trunk that the user checks can be ringing or busy.Caller ID Display SeparatorAn extension’s display can optionally show a calling party number separator. The separator is adash after the area code and after the local exchange on a 7 or 10 digit number.Hardware RequirementsIn DS2000, Caller ID requires the installation of Caller ID Daughter Boards on your ATRU PCBs: 4ATRU PCB P/N 80010A uses Caller ID Daughter Board P/N 92012. 8ATRU PCB P/N 80011A uses Caller ID Daughter Board P/N 80013. The 4ATRU and 8ATRU PCBs must use firmware 1.5 or higher.In DS1000, Caller ID is built-in and requires the installation of no additional equipment.Feature Quick StepsTo cancel the Caller ID display and return your phone to its normal display:1. Press CLEAR.To turn the Caller ID display back on (after you press CLEAR to cancel it):1. Press CHECK.To display the Caller ID data for the third party’s call (i.e., use Third Party Caller ID Check):1. Press ICM + CHECK.2. Press the key for the call you want to check.You can press a line key, loop key, Hotline key or Call Coverage key: