NEC DS2000 Hardware Manual

Also see for DS2000 IntraMail: User guide Feature handbook User guide Feature handbook Feature handbook

Contents

NEC DS2000 Hardware Manual Manual pdf 57 page image

Backing Up Site DataDS2000 Hardware Manual Section 5: Maintenance Options and SMDR 5-15Section 5: MaintenanceOptions and SMDRBacking Up Site DataBacking Up Site DataPC Card Data Base CompatibilitySoftware version 03.**.** databases are not compatible with any prior 02.**.** versions.Backing Up Site Data with a PC CardYou can use PC Card P/N 85880 to back up and restore your site data. You cannot store data bases on PCCard with Software P/N 80051-V03.**.**.To use the PC Card to back up site data (Figure 5-1):1. Insert the PC Card into the CPU.2. Be sure the CPU mode switch is set to RUN.3. Enter the programming mode.ICM + #*#* + 372000 + HOLD4. Dial 9906 + HOLD.You see: START?To quit program 9906 instead, dial N + HOLD .5. Dial Y + HOLD.You see: 9906: DATABASE NAME6. Enter a name for the database you want to save (up to 10 characters long).Refer to Figure 5-2 Entering Names on page 5-3 if you need help when entering names.Skip this step if you want to save data in an address that already has a name assigned.7. When you are done entering the name, press HOLD.You see the name and date of the first database stored. If no data bases are stored, you see:9906: DB00(empty)8. The system assigns the name you entered in step 7 to the data base address you select below:- Press VOL or VOL to scroll through the addresses.There are 16 data base addresses (DB 00 to DB 15).OR- Skip this step to select the currently displayed data base.