NEC DS2000 Hardware Manual
Also see for DS2000 IntraMail: User guideFeature handbookUser guideFeature handbookFeature handbook
                                                                              | |
Contents
| 
Restoring Site Data5-4 Section 5: Maintenance Options and SMDR DS2000 Hardware ManualRestoring Site DataRestoring Site Data from a PC CardTo use the PC Card to restore site data:Review PC Card Data Base Compatibility on page 5-1.1. Insert the PC Card into the CPU (See Using the PC Card on page 5-2).2. Be sure the CPU mode switch is set to RUN.3. Enter the programming mode.ICM + #*#* + 372000 + HOLD4. Dial 9907 + HOLD.You see: START?5. Dial Y + HOLD.You see the name and date of the first database stored. If no data bases are stored, you see:9907: DB00(empty)6. Press VOL or VOL to scroll through the data base addresses and select the one you want to restore.There are 16 data base addresses (DB 00 to DB 15).7. When the data base you want to restore displays, press HOLD.The PC Card Active LED is on during restore.You automatically exit programming when the upload completes.PC Card Restore Error MessagesPC Card Restore Error MessagesThis error message: Means this:NO PCCARD The PC card is not installed. Install the PCcard and try again.NO DATABASE There is no data stored in the data base addressyou selected. Select another data base addressand try again. |
Related manuals for NEC DS2000 IntraMail
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine