BMC Configuration User’s GuideCHECK: Battery Configuration is displayed at the following version when the managed server isequipped with a battery.- BMC Configuration for Windows Ver.1.30 or later Monitoring is displayed at the following version when the managed server supports thisfunction.- BMC Configuration for Windows Ver.1.41 or laterTIPS: Refer to the following to see BMC Configuration help information.- Click "BMC_Configuration" - "BMC Configuration Help"from [start] on Windows.4.1.2 On LinuxAfter the installation is completed, do the following operation as root user to open the setting function ofBMC Configuration./opt/nec/BMC_Configuration/bmcconfTIPS: Refer to the following to see BMC Configuration help information.- Open the setting of BMC Configuration and press F12 key on the screendisplayed "[F12] help" at the bottom.4.1.3 On Off-line TOOLYou can start the Off-line TOOL as follows.(1) The following message is displayed on the bottom of POST screen.Press SETUP, Internal flash memory, ROM Utility, Network(2) Press F4 key on this screen. If F4 key is entered, Keyboard type selection screen is displayed after POSTscreen, and the Off-line TOOL menu is displayed after selecting keyboard type.(3) Select BMC Configuration.TIPS: Off-line TOOL is integrated in the managed server by default. The Off-line TOOL menu is not displayed and BMC Configuration will start directoryaccording to the system. Refer to the following to see help information.- Start the tool and select Help menu, or press Home key or "?" keyon the screen displayed "[ Help:[Home or ?]]" at the bottom.