BMC Configuration User’s Guide5.4 RestoreRestore the system information from files. Select the restore target and click [OK].Item DescriptionFile Locations Set the locations of file.Backup File The backup file is displayed.Browse It changes the backup file.Restore Target Select the restore target.FRU Information Select whether restore FRU Information or not. Only when the targetinformation exists in the file, you are able to select this item.include UUID When you restore FRU Information, select whether restore UUID or not.Only when FRU Information is selected and the target information exists inthe file, you are able to select this item. *1BIOS Information Select whether restore BIOS Information or not. Only when the targetinformation exists in the file, you are able to select this item.BMC Information Select whether restore BMC Information or not. Only when the targetinformation exists in the file, you are able to select this item.*1: When you restore UUID, BMC will be reset. In this case, it will take a few minutes to restart BMC.To reflect the setting, it is necessary to reboot the server.IMPORTANT: This operation may cause data destruction. Other than the maintenance person, please donot run. False HW error information may be detected on the server if Shutdown, Reboot, or anyother operation is executed during a few minutes after this operation. Please refer to theserver's User's Guide to get more information, because the occurrence of the false HW errordetection depends on the model of the server.CHECK: You need backup file in the Backup function. Off-line TOOL has no restore function.