BMC Configuration User’s Guide4.4 Battery ConfigurationIf the managed server is equipped with a battery, you can check and configure the information of the battery.CHECK: Battery Configuration is not displayed if the managed server is not equipped with a battery. Select Battery Configuration in Off-line TOOL.4.4.1 Battery Pack InformationThis screen displays the various information of the battery pack.Item DescriptionBattery Pack Information Displays the information of the Battery Pack 1 and 2.Status The detected state of the battery pack is displayed.Normal / Warning / Error / Not MountedCharge Status The charge status of the battery pack is displayed. *1Fully Charged / Charging / Discharging(%) / UnknownBattery Pack Replacement The necessity of the battery pack replacement is displayed. *1Need / No NeedRemaining Charge The remaining charge[mAh] of the battery pack is displayed. *1Remaining Charge: The remaining capacity for the Full Charge Capacity.Full Charge Capacity The full charge capacity[mAh] of the battery pack is displayed. *1Full Charge Capacity: The battery capacity that could be discharged to the voltageat the end of discharge from full charge.Rated Capacity The rated capacity[mAh] of the battery pack is displayed. *1Rated Capacity: The minimum capacity of the battery pack based on thecharge and discharge conditions of JIS C8708 2007.