5-52 Installing and Using UtilitiesMaintenance of NEC Express5800/ft seriesNEC Express5800/ft series maintenance can be done in two ways; one is to use NEC ESMPROManager for remote maintenance and the other is to use the NEC ESMPRO Agent ft server utilityon the NEC Express5800/ft series for local maintenance.TIPS: To start the NEC ESMPRO Agent ft server utility installed in the NEC Express5800/ftseries, select the items as follows:Start Menu→[Programs]→[NEC ESMPRO Agent]→[ft server utility]The maintenance functions that can be executed from NEC ESMPRO include three types, thosecommon to all components, those specific to particular components, and general system settings.The maintenance functions common to all components are operated in the same way basically (theoperation procedure and typical examples of screen images are described below).The table below lists the availability of maintenance functions common to all components.Start Stop MTBFclearDiag-nosisF/WupdateComponentR L R L R L R L R LCPU module √ √ √ √ √ √ √ √ √ √PCI module √ √ √ √ √ √ √ √ – –PCI slot – – – – – – – – – –Ethernet adapter – – – – √ √ – – – –SCSI adapter – – – – – – – – – –SCSI enclosure – – – – – – – – – –SCSI electronics – – – – – – – – – –SCSI slot – – – – – – – – – –R: Remote. Executable from remote management PC by using NEC ESMPRO ManagerL: Local. Executable on local server by using ft server utility√: Supported–: Not supportedNote: The MTBF clear of SCSI adapter and Ethernet cannot be performed to built-in devices.
