4-54 System ConfigurationUsing Remote ManagementOverviewYou can control power of this server and use the remote KVM console from a web browser byusing web server functions of BMC.IMPORTANT:Remote KVM console is available only on the LAN port of the primary CPU/IO module(the operating side’s CPU/IO module). This is not available on the LAN port of the secondaryCPU/IO module (the waiting side’s CPU/IO module).This function is achieved by Java Applet.How to get connectedFrom a Web browser on the management PC, access the following URL.URL: http://BMC_HostPort/index.htmTIPS:“BMC_HostPort” is a BMC IP address or host name followed by a colon and http port number.If the http port number is 80 (the default value), you can omit the port number.When connecting to network which supports DHCP protocol:The default host name of BMC is ARMC characters followed by the MAC address if you useDHCP functions and automatically register it with your DNS server.When connecting to network which does not support DHCP protocol:(1) The default IP address of the LAN of the managed server is “192.168.1.1” for both CPU/IPmodule #0 and #1. If you want to access the network that does not support DHCP protocol,access the network that the default IP address can use, and then set the IP address accordingto your network environment from the managing PC (see “BMC Configuration”).Default hostIP Address : 192.168.1.1User Name : administratorPassword : (None)Host Name : ARMCXXXXXXXXXXXX
