NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual

Also see for EXP320J: User guide User guide User guide User guide

Contents

NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual Manual pdf 446 page image

8-12 System UpgradeRemoving CPU/IO ModuleFollow the procedure below to remove the CPU/IO module.1. Stop the CPU/IO module you want to remove.To this end, use the ftServer Utility of the NEC ESMPRO Agent installed to your server orthe Data Viewer of the NEC ESMPRO Manager.For the detailed procedure, see “NEC ESMPRO Agent and Manager” – “Maintenance ofNEC Express5800/ft series” in Chapter 5.NEC ESMPRO ManagerSelect [ft] - [CPU Module] - [CPU Module (to beremoved)] - [Maintenance] - [Bring Up/Bring Down]- [Bring Down].ftServer UtilitySelect [FTServer] - [CPU Module] - [CPU Module (tobe removed)] - [Bring Up/Bring Down] - [Down].Repeat the operation mentioned above for the IO module (PCI module) and confirm that thestatus of the CPU/IO module and the IO module (PCI module) are “Removed.”TIPS:When removing CPU/IO modules 0, select [Bring Down] for CPU module (ID:0) and PCImodule (ID:10)2. Remove the front bezel