Installing and Using Utilities 5-161Status BarThe status bar (below figure), which is located at the bottom of the Active Upgrade Consolewindow, reports a quick summary of the status of the upgrade.Status Bar1 Configuration file name2 Hardware State (Table 1)3 Upgrade State (Table 2)4 Operational State (Table 3)5 Partner State (Table 4)The Hardware State reports whether or not your critical applications are running in lockstep. Thebelow table describes the possible hardware states.Status: Hardware StateHardware State DescriptionFault-tolerant The system is duplexed.Production Side The system is currently running in split mode, and your applications arerunning from the Production Side (the original copy of your software).The Upgrade Side is available for installation tasks.The Upgrade State reports the stage of the upgrade your system is entering or has entered. Thebelow table describes the possible upgrade states.Status: Upgrade StateUpgrade State DescriptionIdle The current upgrade session is idle. The Active Upgrade process hasjust finished, or it has not been initiated yet.Prepare Split The Active Upgrade Console is preparing to split the system by runninga final readiness check and additional background tasks.Split If the operational state is Ready, the system is running in split mode.
