2. Ideal Location and ConnectionExpress5800/GT110d-S User’s Guide120Chapter 2 Preparations2.2 ConnectionConnect peripheral devices to the server. Connectors that allow a variety of peripheral devices to beconnected are provided at the front and rear of the server. Images on the following pages show theperipheral devices that can be connected in their standard state and their respective connector positions.First connect the peripheral devices and then connect the power cord to the server. After that, connect thepower plug to the outlet.WARNINGBe sure to observe the following precautions to use the server safety. Failure toobserve the precautions may cause death or serious injury. For details, refer toSafety precautions in Precautions for Use.• Do not hold the power plug with wet hands.CAUTIONBe sure to observe the following precautions to use of the server safely. Failureto observe the precautions may cause burns, injury, and property damage. Fordetails, refer to Safety precautions in Precautions for Use.• Use only the specified outlet to insert.• Do not connect the power cord to an outlet that has an illegal number ofconnections.• Insert the power plug into the outlet as far as it goes.• Use only the specified power cord.• Do not connect or disconnect the interface cable while the power cord isconnected.• Use only the specified interface cable.
