NEC Express5800/GT110d-S (2C/i3-2120) EXP281A User Manual

Also see for NEC Express5800 Series: User guide User guide User guide User guide Configuration guide

Contents

NEC Express5800/GT110d-S (2C/i3-2120) EXP281A User Manual Manual pdf 29 page image

3. Standard FeaturesExpress5800/GT110d-S User’s Guide 29Chapter 1 General Description3.1 Management FeaturesThe hardware components of the server provide operation control/reliability features as shown below.Additionally, NEC ESMPRO Agent, which is provided in EXPRESSBUILDER, enables you to collectivelymanage the state of your systems. You can also monitor the server states from a PC to manage the networkwhere NEC ESMPRO Manager provided in EXPRESSBUILDER is installed.The features available on this server are as shown in the table below.Function Availability DescriptionShows physical hardware information.Memory bank { Shows physical memory information.Device info { Shows information specific to the server.HardwareCPU { Shows physical CPU information.System { Shows logical CPU information and monitors the load factor.Shows logical memory information and monitors the status.I/O device { Shows information on I/O devices ( serial ports, keyboard, mouse, andvideo).Temperature { Monitors the temperature inside of the chassis.Fan { Monitors the fans.Voltage { Monitors the voltage inside of the chassis.Power supply { Monitors the power supply unit.SystemenvironmentDoor × Monitors chassis intrusion (open/close of the covers and doors on thechassis).Software { Shows service, driver, and OS information.Network { Shows network (LAN) information and monitors packets.BIOS { Shows BIOS information.Local polling { Monitors the values of an MIB item obtained by NEC ESMPRO Agent.Storage { Monitors controllers and storage devices including Hard Disk Drives.File system { Shows the file system configuration and monitors the free space.RAID System/Disk Array { Monitors the following RAID Controllers:• On-board RAID Controller (LSI Embedded MegaRAID TM)• Optional RAID Controller N8103-128/129/130/134{ Monitors OS stall using the Watch Dog Timer.Others*{ Performs alert processing after an OS STOP error occurs.{: Supported. U: Partially supported. ×: Unsupported.*: Not displayed on the NEC ESMPRO Manager screen.Tips NEC ESMPRO Manager and NEC ESMPRO Agent are supplied with the server asstandard. For how to install and use each software component, refer to theexplanation of the component.