1. Installing Internal Optional DevicesExpress5800/GT110d-S User’s Guide 87Chapter 2 Preparations1.10.6 Installing the N8117-01A expansion RS-232C connector kitInstall a PCI card to connect to the PCI slot by using the following procedure. For details, refer to theinstruction manual supplied with the connector kit.Important The N8117-01A expansion RS-232C connector kit contains two types of cables. Thisserver uses the RS-232C cable (B).Tips N8117-01A extra RS-232C connector kit is only supported by air-cooled models. It cannotbe installed in water-cooled models.The component parts for N8117-01A are as follows:Item no. Item name Specification Amount Remarks<1> RS-232C connector kitmanual 856-125671-002 1<2> RS-232C cable (A) 804-063264-020 1<3> RS-232C cable (B) 804-062746-820 1<4> PCI bracket (1) 243-112122-001 1 Preinstalled to cable<5> PCI bracket (2) 243-112122-002 1 For full height PCIThis product uses a combination of items <3> and <4>.Follow the procedure below to install the kit.1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.2. Remove the side cover while referring to Chapter 2 (1.4 Removing the Side Cover).3. Assemble <3> RS-232C cable (B) and <4> PCI bracket (1).4. Open the PCI slot retention while referring to Chapter 2 (1.10.3 Installation).<4><2><3><5>
