NEC HT410 User Manual
Also see for HT410 Series: Supplementary guideControl commandsCommand guideCommand guideControl commands
                                                                                | |
Contents
| 
E-5Terminal Panel Features1. COMPUTER IN / Component Input Connector (Mini D-Sub 15 Pin)Connect your computer or other analog RGB equipment such as IBM compatible or Macintosh computers.Use the supplied RGB/VGA cable to connect to your computer. This also serves as a component input con-nector that allows you to connect a component video output of component equipment such as a DVD player(optional adapter ADP-CV1 required).2. AUDIO IN mini jack (Stereo Mini)This is where you connect the audio output from your computer or DVD player when connected to the COM-PUTER IN or COMPONENT IN.3. COMPONENT IN (Y, Cb/Pb, Cr/Pr) connectors (RCA)Connect component video outputs (Y/Cb/Cr, Y/Pb/Pr) here from external equipment such as a DVD player.4. S-VIDEO IN connector (Mini DIN 4 Pin)Here is where you connect the S-Video output from an external source like a VCR.NOTE: S-Video provides more vivid color and higher resolution than the traditional composite video format.5. VIDEO IN connector (RCA)Connect a VCR, DVD player, laser disc player, or document camera here to project video.6. AUDIO IN jacks L & R (RCA)These are your left and right channel audio inputs for stereo sound from a Video or S-Video source.7. PC CONTROL Port (Mini DIN 8 Pin)Use this port to connect a PC or control system. This enables you to control the projector using serial commu-nication protocol. If you are writing your own program, typical PC control codes are on page E-57.1. INTRODUCTIONPC CONTROLCOMPONENT INCOMPUTER INVIDEO INAUDIO INS-VIDEO INRLCr/PrCb/PbYAUDIO IN7 4 6312 5 |
Related manuals for NEC HT410 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine