NEC HT410 User Manual

Also see for HT410 Series: Supplementary guide Control commands Command guide Command guide Control commands

Contents

NEC HT410 User Manual Manual pdf 46 page image

E-35Menu Descriptions & FunctionsPictureYou can adjust brightness, contrast, sharpness, color, hue, noise reduction and Telecine.NOTE: When one of Brightness, Contrast, Sharpness, Color or Hue is highlighted, pressing the ENTER button will displayits slide bar for adjustment.Brightness ...... Adjusts the brightness level or the black level of the image.Contrast ......... Adjusts the intensity of the image according to the incoming signal (White level of the image).Sharpness ..... Controls the detail of the image for Video.Color .............. Increases or decreases the color saturation level (not valid for RGB).Hue ................ Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjust-ment is only valid for Video and Component inputs (not valid for RGB).Noise Reduction .. Turn on or off the noise reduction feature. To reduce video noise, select On.NOTE:• This feature is not available for 480p, 576p, 720p and non-1080i HDTV and RGB signals• Noise reduction set to off gives best image quality by way of higher bandwidth. Noise reduction set toon softens the image.Telecine ......... Use 3:2 pull down correction to eliminate jitter and artifacts in video.Auto: For film source such as a DVD player.Off: For signals other than film sources.NOTE: This feature is not available for 480p, 576p, 720p and non-1080i HDTV and RGB signalsAdjustmentYou can adjust Wall Color, Color Management, Gamma Correction, Color Temperature and White Peaking.Selecting Wall Color Correction Mode [Wall Color]This function allows for quick adaptive color correction in applications where the screen material is not white.The following eight options are available: Off, Blackboard, Light yellow, Light green, Light blue, Sky blue, Lightrose and Pink.5. USING ON-SCREEN MENU