E–21VIDEOS-VIDEORGBAUDIOPC CONTROLWiring DiagramOptional Component V cableTo video, S-video, and audioinputs on the projector.RGB Signal cable (supplied)To mini D-Sub 15-pin connector on theprojector. It is recommended that you use acommercially available distribution amplifier ifconnecting a signal cable longer than thesupplied cable.IBM VGA or Compatibles(Desktop type or notebook type)Macintosh(Desktop type or notebook type)Document CameraDVD Player (with component output)VCR, DVD Player or LaserDisc PlayerNOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In mostcases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.NOTE:* If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power management software.* If you accidentally hit the POWER button on the remote control, wait 90 seconds and then press the POWER button again to resume.NOTE: If using video, S-video, or audio cables, the cables should be 3 m (9.8 feet) or shorter.
