NEC LT150 User Manual

Also see for LT150 - MultiSync XGA DLP Projector: Technical bulletin Quick guide

Contents

NEC LT150 User Manual Manual pdf 42 page image

E–39Clock .......... Use this item to fine tune the computer image or to remove anyvertical banding that might appear. This function adjusts the clockfrequencies that eliminate the horizontal banding in the image.Press the ß and © buttons until the banding disappears.This adjustment may be necessary when you connect your com-puter for the first time. This adjustment is made automatically whenthe Auto Adjust is turned on.Phase ......... Use this item to adjust the clock phase or to reduce video noise,dot interference or cross talk. (This is evident when part of yourimage appears to be shimmering.) Use the ß and © buttons toadjust the image.Use "Phase" only after the "Clock" is complete.This adjustment is made automatically when the Auto Adjust isturned on.Resolution (when Auto Adjust is off)This allows you to activate or deactivate the Advanced AccuBlendfeature.Auto ............ Turns on the Advanced AccuBlend feature. The projector auto-matically reduces or enlarges the current image to fit the full screen.Native ......... Turns off the Advanced AccuBlend feature. The projector displaysthe current image in its true resolution.See "Auto Adjust (RGB Only) on page E-41 for turning on or offthe Auto Adjust feature.NOTE: While you are displaying an image with higher resolution than theprojector's native resolution, even when you are in the Native mode, the imageis displayed full screen using the Advanced AccuBlend feature.Factory DefaultChanges all adjustments and setting to the factory preset for eachsource individually except Lamp Hour Meter, Projector Usage, Lan-guage and Communication Speed. (To reset the lamp usage time, see"Clear Lamp Hour Meter" on page E-42.)All Data ....... Reset all the adjustments and settings for all the signals to thefactory preset.Current Signal . Resets the adjustments for the current signal to the factory presetlevels.The items that can be reset for the currently projected image are:Picture (Brightness, Contrast, Color, Hue and Sharpness) and ImageOptions (Color Temperature, Gamma Correction, Advanced Options(Aspect Ratio, Noise Reduction, Color Matrix, White Balance, Posi-tion/Clock and Resolution).NOTE: The Volume, Keystone and all the items in the Projector Options can bereset only when "All Data" is selected.MenuProjector Options