NEC MD210C2 Installation & Maintenance Manual

Also see for MD210C2: Installation & maintenance guide

NEC MD210C2 Installation & Maintenance Manual Manual pdf 12 page image

English-10Screen RotationBefore rotating, the screen must be raised to the highest level and tilt to avoid knocking the screen on the desk or pinching yourfi ngers. Disconnect all cables.To raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1).To rotate the screen, place hands on each side of the monitor and turn clockwise from Landscape to Portrait or counter-clockwise from Portrait to Landscape (Figure R.1).To rotate the OSD menu between landscape and portrait, refer to Controls section.Figure R.1TiltGrasp both sides of the monitor with your hands and adjust the tilt as desired (Figure TS.1).Figure TS.1NOTE: Handle with care when tilting the monitor.SwivelGrasp both sides of the monitor with your hands and adjust the swivel as desired (Figure TS.2).Figure TS.2