967. Connecting to a Network1 Things you can do by connecting the projector to a network• You can send screen images via a wired LAN/wireless LAN from a terminal installed with our MultiPresenter appto the projector and project them onto a screen.See our company’s website for more details about MultiPresenter.https://www.nec-display.com/dl/en/soft/multipresenter/index.htmlB C D EA BC DASimultaneous displaySimultaneous connectionSend Send Send Send Stop• When connecting the projector using a wireless LAN, you can set the following 3 profiles under the [NETWORKSETTINGS] in the menu.Profile name DescriptionINTELLIGENT CONNECTION The projector can be easily connected peer-to-peer to a computer or tabletterminal installed with MultiPresenter.INFRASTRUCTURE Connect the projector to an existing access point and connect it to acomputer or tablet terminal installed with MultiPresenter.SIMPLE ACCESS POINT Turn the projector into a simple access point to connect to a computer ortablet terminal.• Multiple computers or tablet terminals can be connected at the same time. A maximum of 16 units can be con-nected in the FREE mode and a maximum of 50 units can be connected in the MANAGED mode.• Using the web browser of a computer and tablet terminal connected to a wired LAN/wireless LAN, you can con-nect the projector to a HTTP server to control the projector or configure the NETWORK SETTINGS.• By configuring the network service settings of the projector, AMX BEACON, HTTP server logon password, PJLink,ALERT MAIL, CRESTRON, etc., can be used.
