91. IntroductionBattery Installation1. Press firmly and slide the bat-tery cover off.2. Install new batteries (AAA).Ensure that you have the bat-teries’ polarity (+/−) alignedcorrectly.3. Slip the cover back over thebatteries until it snaps intoplace. Do not mix differenttypes of batteries or new andold batteries.OPENOPENRemote Control Precautions• Handle the remote control carefully.• If the remote control gets wet, wipe it dry immediately.• Avoid excessive heat and humidity.• Do not short, heat, or take apart batteries.• Do not throw batteries into fire.• If you will not be using the remote control for a long time, remove the batteries.• Ensure that you have the batteries’ polarity (+/−) aligned correctly.• Do not use new and old batteries together, or use different types of batteries together.• Dispose of used batteries according to your local regulations.Operating Range for Wireless Remote Control30°30°30°30°22 feet/7 m Remote control• The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angleof the remote sensor on the projector cabinet.• The projector will not respond if there are objects between the remote control and the sensor, or if strong lightfalls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.
