7. Connecting to a Network972 Connecting to MultiPresenterPreparations:• When connecting the projector to a wired LAN, connect a LAN cable to the projector. (→ page 94)• When connecting the projector to a wireless LAN, install a separately-sold (or the enclosed) LAN unit (NP05LM)in the projector. (→ page 95)• Configure the NETWORK SETTINGS of the projector. (→ page 99)• Install the MultiPresenter app in the computer or tablet terminal.https://www.nec-display.com/dl/en/soft/multipresenter/index.htmlThe procedure is described here for each wireless LAN profile “INTELLIGENT CONNECTION”, “INFRASTRUCTURE”,and “SIMPLE ACCESS POINT”.① When connecting with an INTELLIGENT CONNECTION1. Turn on the power of the projector and press the APPS button on the remote control.The start-up screen of MultiPresenter is displayed.2. Start MultiPresenter.The target device screen is displayed.3. Enter the 4-digit PIN code displayed in the start-up screen in the target device screen.When connection with the projector is completed, the screen of the computer or tablet terminal is projected onthe screen.
