21. Introduction❷ Introduction to the ProjectorThis section introduces you to your new projector and describes the features and controls.Features you’ll enjoy:• Quick Power Off, Direct Power OffThe projector can be put away immediately after the projector is powered down. No cool down period is requiredafter the projector is turned off from the remote control or cabinet control panel.The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (evenwhen projecting an image) by using the Main Power Switch or disconnecting the AC power supply.To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch anda breaker.• 0.18W(100-130 V AC)/0.26W (200-240 V AC) in standby condition with energy saving technologySelecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode thatconsumes only 0.18W(100-130 V AC)/0.26W (200-240 V AC).• Carbon MeterThis feature will show energy-saving effect in terms of CO 2 emission reduction (kg) when the projector’s [ECOMODE] is set to [AUTO ECO], [NORMAL], or [ECO].The amount of CO 2 emission reduction will be displayed in the confirmation message at the time of power-offand in the INFO of the on-screen menu.• Lamp life up to 15000 hoursUsing in Eco Mode (ECO) allows you to prolong the projector’s lamp life up to 15000 hours (up to 10000 hoursin ECO MODE OFF).• Two HDMI inputs support digital signalsThe two HDMI inputs provide HDCP compatible digital signals. The HDMI input also supports audio signal.• Integrated RJ-45 terminal for wired networking capability along with wireless networking capabilitiesAn RJ-45 terminal is standard. An optional USB Wireless LAN Unit is required for wireless LAN connection.• INTELLIGENT CONNECTIONIt enables easily to connect your projector to computers or smartphones, on which the application software,MultiPresenter, has been installed, by inputting PIN code.• 16 W built-in speaker for an integrated audio solutionPowerful 16 watt monaural speaker provides volume need for large rooms.• The supplied remote control allows you to assign a CONTROL ID to the projectorMultiple projectors can be operated separately and independently with the same single remote control by as-signing an ID number to each projector.• USB DisplayUsing a commercially available USB cable (compatible with USB 2.0 specifications) to connect the computer withthe projector allows you to send your computer screen image to the projector without the need of a traditionalcomputer cable (VGA).
