NEC MultiSync LCD1990FXp User Manual

Also see for MultiSync LCD1990FXp: Specifications Specifications Features and benefits User manual Product dimensions

NEC MultiSync LCD1990FXp User Manual Manual pdf 11 page image

EnglishEnglish-9ECO MODEDecreases the amount of power consumed by reducing the brightness level.1: Decreases the brightness by 25%.2: Decreases the brightness by 50%.CUSTOM: Decreases the brightness level as determined by the user.Refer to the Advanced OSM menu for custom setting instructions.AUTO BRIGHTNESSOFF: No function.ON: Adjusts the brightness automatically, by detecting the brightness level of your environment and adjusting themonitor with the best BRIGHTNESS setting* 1 .NOTE: Do not cover environmental brightness sensor (Ambibright sensor).* 1 : Please refer to Page 20 for full “Auto Brightness” information.BLACK LEVELAdjust the black level.Auto Adjust (Analog input only)Automatically adjusts the Image Position and H. Size settings and Fine settings.Image ControlsLEFT / RIGHT (Analog input only)Controls Horizontal Image Position within the display area of the LCD.DOWN / UP (Analog input only)Controls Vertical Image Position within the display area of the LCD.H.SIZE (V.SIZE) (Analog input only)Adjusts the horizontal size by increasing or decreasing this setting.If the “AUTO Adjust function” do not give you a satisfactory picture setting, a further tuning can be performed usingthe “H.Size (or V.Size)” function (dot clock). For this a Moiré test pattern could be used. This function may alter thewidth of the picture. Use Left/Right Menu to center the image on the screen. If the H.Size (or V.Size) is wronglycalibrated, the result would look like on the left drawing. The image should be homogeneous.FINE (Analog input only)Improves focus, clarity and image stability by increasing or decreasing this setting.If the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, a fine tuning canbe performed using the “Fine” function.For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look like on theleft drawing. The image should be homogeneous.When H.SIZE value iswrong.When H.SIZE value isimproved.When H.SIZE value iscorrect.When FINE value iswrong.When FINE value iscorrect.