NEC MultiSync LCD1990FXp User Manual

Also see for MultiSync LCD1990FXp: Specifications Specifications Features and benefits User manual Product dimensions

NEC MultiSync LCD1990FXp User Manual Manual pdf 13 page image

EnglishEnglish-11MENU ToolsLANGUAGEOSM control menus are available in eight languages.OSM LEFT/RIGHTYou can choose where you would like the OSM control image to appear on your screen. Selecting OSM Locationallows you to manually adjust the position of the OSM control menu left or right.OSM DOWN/UPYou can choose where you would like the OSM control image to appear on your screen. Selecting OSM Locationallows you to manually adjust the position of the OSM control menu Up or Down.OSM TURN OFFThe OSM control menu will stay on as long as it is use. You can select how long the monitor waits after the last touchof a button to shut off the OSM control menu. The preset choices are 10-120 seconds by 5 seconds step.OSM LOCK OUTThis control completely locks out access to all OSM control functions. When attempting to activate OSM controlswhile in the Lock Out mode, a screen will appear indicating the OSM controls are locked out.There are four types of OSM LOCK OUT:OSM LOCK OUT with BRIGHTNESS and CONTRAST control: To activate the OSM Lock Out function, pressSELECT, then “UP” button and hold down simultaneously. To deactivate the OSM Lock Out, press SELECT, then “UP”button and hold down simultaneously while in the OSM menu. BRIGHTNESS and CONTRAST can be adjusted whilein the lock out mode.OSM LOCK OUT with no control: To activate the OSM Lock Out function, press SELECT, then “Right” button andhold down simultaneously. To deactivate the OSM Lock Out, press SELECT, then “Right” button and hold downsimultaneously while in the OSM menu. No controls can be adjusted while in the lock out mode.OSM LOCK OUT with BRIGHTNESS (only) control: To activate the OSM Lock Out function, press SELECT, then“Down” and “Left” buttons and hold down simultaneously. To deactivate the OSM Lock Out, press SELECT, then“Down” and “Left” buttons and hold down simultaneously while in the OSM menu. BRIGHTNESS can be adjustedwhile in the lock out mode.CUSTOM: Refer to the Advanced OSM Menu.RESOLUTION NOTIFIERThis optimal resolution is 1280 x 1024. If ON is selected, a message will appear on the screen after 45 seconds,notifying you that the resolution is not at 1280 x 1024.InformationProvides information about the current resolution display and technical data including the preset timing being usedand the horizontal and vertical frequencies. Indicates the model and serial numbers of your monitor.OSM WarningOSM Warning menus disappear with Exit button.NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical Sync. After power isturned on or when there is a change of input signal, the No Signal window will appear.RESOLUTION NOTIFIER: This function gives a warning of use with optimized resolution. After power isturned on or when there is a change of input signal or the video signal doesn’t have proper resolution, theResolution Notifier window will open. This function can be disabled in the TOOL menu.OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. Afterthe power is turned on or there is a change of input signal or the video signal doesn’t have proper timing,the Out Of Range menu will appear.NOTE: It is possible to change the DVI selection or to change the IPM settings while the “NO SIGNAL” or“OUT OF RANGE” messages are displayed.For advanced user menu see “Appendix”.