NEC MultiSync LCD1990FXp User Manual

Also see for MultiSync LCD1990FXp: Specifications Specifications Features and benefits User manual Product dimensions

NEC MultiSync LCD1990FXp User Manual Manual pdf 6 page image

English-4Figure C.1HighestStandPositionQuick StartTo attach the LCD monitor to your system, follow these instructions:1. Turn off the power to your computer.2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in yoursystem (Figure A.1). Tighten all screws.For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in yoursystem (Figure A.2). Tighten all screws.For the MAC: Connect the Macintosh cable adapter to the computer, then attach the 15-pin mini D-SUB signal cable tothe Macintosh cable adapter (Figure B.1). Tighten all screws.NOTE: Some Macintosh systems do not require a Macintosh cable adapter.3. With one hand, grip the top of the display by the handle using the other hand to grip the bottom and tilt the LCD panel30-degree angle and lift up to the highest position (Figure C.1).4. Connect all cables to the appropriate connectors (Figure C.1).NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of LCD moduleand/or shorten the module’s life.5. To keep the cables neatly organized, place them into the cable management system that is built into the stand.Place the power cable into the specific hooks as indicated (Figure C.2).Place the DVI cable and the 15-pin mini D-Sub signal cable into the hooks as indicated (Figure C.2).When using the monitor in Portrait mode, place the DVI cable and the 15-pin mini D-Sub signal cable into the hooks asindicated (Figure C.3).6. Make sure all cables are resting flat against the stand (Figure C.2).Please check Tilt, Rise and Lower monitor screen and screen rotation when you manage cables.Figure A.1 Figure B.1MacintoshCable Adapter(not included)Figure A.230˚ TiltDVI-ID-SUBPower cordDC-OUTNEC optional product attachment.Do not use this connector unless specified.