NEC MultiSync LT156 User Manual

Also see for LT154 - MultiSync UXGA DLP Projector: Installation data Quick guide Quick connect guide

Contents

NEC MultiSync LT156 User Manual Manual pdf 18 page image

E – 15Switching operation mode between mouse and projectorThe three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.In the Computer mode the PJ button is not lit.• When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menuoperation using the three buttons.• When the POINTER button is pressed, the PJ button lights red to indicate that you are in the Projector mode and that the MOUSE ▲▼ buttonworks as a moving button for the POINTER or magnified image.• If no buttons are pressed within 10 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the projectormenu operation again, press the PJ button to light red. To move the pointer or a magnified image again, turn off the pointer and then turn on thepointer (press the POINTER button two times).• When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).KEYSTONEFREEZEPIC-MUTEHELP POINTER PC CARDVIDEO S-VIDEO AUTO ADJ.RGB 1MENU LASERR-CLICK /CANCELL-CLICK/ENTERRGB 2 P JONOFFMAGNIFYVOL.SLIDEFOLDERSLIDELISTKEYSTONEFREEZEPIC-MUTEHELP POINTER PC CARDVIDEO S-VIDEO AUTO ADJ.RGB 1MENU LASERR-CLICK /CANCELL-CLICK/ENTERRGB 2 P JONOFFMAGNIFYVOL.SLIDEFOLDERSLIDELISTNot litWorks as a mouse for your computer.Works as a right-click buttonfor your computer.Works as a left-click buttonfor your computer.Lit redWorks as the Select buttonon the projector.Works as the Cancelbutton on the projector.Works as the Enterbutton on the projector.