NEC MultiSync LT156 User Manual

Also see for LT154 - MultiSync UXGA DLP Projector: Installation data Quick guide Quick connect guide

Contents

NEC MultiSync LT156 User Manual Manual pdf 30 page image

E – 27Source displayEach time the Source button is pressed, the input source will changeas follows:→ RGB [“DVI (DIGITAL) → DVI (ANALOG)” on LT156] → Video PC Card Viewer ← S-Video ←If no input signal is present, the input will be skipped. Press the Auto Adjust button to fine-tune the computer image or toremove any vertical banding that might appear and to reduce videonoise, dot interference or cross talk (this is evident when part of yourimage appears to be shimmering). This function adjusts the clock fre-quencies that eliminate the horizontal banding in the image. This func-tion also adjusts the clock phase to reduce video noise, dot interfer-ence or cross talk. (This is evident when part of your image appears tobe shimmering.)This adjustment may be necessary when you connect your computerfor the first time.NOTE: The Auto Adjust function does not work for component signal.Basic OperationSelecting the computer or video source:Optimizing RGB image automaticallyPress the Auto Adjust button to optimize an RGB image automatically.SOURCEAUTOADJUSTHELP POINTER PC CARDAUTO ADJ.VIDEO S-VIDEORGB 1 RGB 2 PJSOURCEAUTOADJUSTVIDEO S-VIDEO AUTO ADJ.RGB 1MENU LASERRGB 2 PJONOFFOn LT156:Press the RGB 1 button on the remote control to select DVI digitalsignal and the RGB 2 button for DVI analog signal.