NEC MultiSync UN462A User Manual

Also see for MultiSync UN462A: Installation guide Installation guide Firmware update procedure User manual

Contents

NEC MultiSync UN462A User Manual Manual pdf 128 page image

English−124Disposing of your old NEC productThe aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation ofmaterial. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securelydisposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures andgives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.All required information concerning the disposal of the product and country-specific information on recycling facilities can befound on our following websites:https://www.nec-display-solutions.com/p/greenvision/en/greenvision.xhtml (in Europe)https://www.nec-display.com (in Japan)https://www.necdisplay.com (in USA).Energy SavingThis monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the monitor,the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.For additional information visit:https://www.necdisplay.com/ (in USA)https://www.nec-display-solutions.com/ (in Europe)https://www.nec-display.com/global/index.html (Global)For ErP requirement/For ErP (Network standby) requirement:Except for conditions below: The monitor is using an Option Board.[INPUT DETECT] is set to a setting except for NONE.[USB POWER] is set to [ON].[DisplayPort] in the [TERMINAL SETTINGS] is set to [MST].Power consumption (Glowing amber): 2.0 W or less (with 1 port connection)/3.0 W or less (with all ports connection).Time for power management function: 10 sec. (Default setting).Power consumption (Blinking amber): 0.5 W or less.Time for power management function: 3 min. (Default setting).(Except for a condition that the monitor has plural signal inputs).WEEE Mark (European Directive 2012/19/EU and amendments)Disposing of your used productN: In the European UnionEU-wide legislation as implemented in each Member State requires that used electrical and electronic productscarrying the mark (left) must be disposed of separately from normal household waste. This includes monitorsand electrical accessories, such as signal cables or power cords. When you dispose of such products, pleasefollow the guidance of your local authority or ask the shop where you purchased the product, or if applicable,follow applicable legislation or agreement you may have. The mark on electrical and electronic products mayonly apply to the current European Union Member States.uct, or if applicable, follow applicable legislationor agreement you may have. The mark on electrical and electronic products may only apply to the currentEuropean Union Member States.Outside the European UnionIf you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authorityand ask for the correct method of disposal.

/ 128

Related manuals for NEC MultiSync UN462A