NEC MultiSync UN462A User Manual

Also see for MultiSync UN462A: Installation guide Installation guide Firmware update procedure User manual

Contents

NEC MultiSync UN462A User Manual Manual pdf 30 page image

English−26Connecting to a Computer with HDMI• Please use an HDMI cable with the HDMI logo.• It may take a moment for the signal to appear after turning on the computer.• Some display cards or drivers may not display an image correctly.• When you use a computer with HDMI, please set [OVER SCAN] to [AUTO] or [OFF] as display drivers may not be fullycompatible and may not display an image correctly. See page 106.• To output HDMI audio, set [HDMI1] or [HDMI2] at AUDIO INPUT in the OSD or choose [HDMI1] or [HDMI2] by pressing theremote control AUDIO INPUT button.• If the source signal is 3840 x 2160 (60 Hz) or HDCP2.2 or HDR, please set [MODE2] at [HDMI] in [TERMINAL SETTINGS].See page 111.• If the monitor’s main power is turned on after a connected computer is turned on, sometimes an image is not displayed.In this case, please turn off the computer then turn it on again.Connecting a Computer with DisplayPort• Please use a DisplayPort cable with the DisplayPort compliance logo.• To use the DisplayPort out connector, please refer to Video out. See page 72.• It may take a moment for the signal to appear after turning on the computer.• When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear.• Some DisplayPort cables feature a locking function. When removing this cable, hold down the top button to release the lock.• To output DisplayPort audio, set [DisplayPort1] or [DisplayPort2] at [AUDIO INPUT] in the OSD or choose [DisplayPort1] or[DisplayPort2] by the remote control AUDIO INPUT button.• To display individual images at each connected monitors with the DisplayPort OUT connector, please set [DisplayPort1.2]and [MST] at [DisplayPort] in the [TERMINAL SETTINGS]. See page 111.• If the monitor’s main power is turned on after a connected computer is turned on, sometimes an image is not displayed.In this case, please turn off the computer then turn it on again.Connecting to a Media Device with HDMIConnect using a single HDMI cable for the highest picture and audio quality from Blu-ray players, streaming media players, orgame consoles. 4K UHD content is displayed when the connected media player also supports 4K content.Supports HDCP (High-bandwidth Digital Contents Protection) coding, a type of digital rights management that prevents high-definition content, in Blu-ray discs, DVDs and streaming media, from being copied or broadcast illegally.NOTEN: • Supports 1920x1080 (60 Hz), 1080p, 1080i, 720p@50Hz/60Hz, 576p@50Hz, 480p@60Hz, 576i@50Hz,480i@60Hz, 3840x2160 (30Hz/24Hz/25Hz [MODE1]), 3840x2160 (60Hz [MODE2]), 4096x2160 (24Hz).• Connect the HDMI cable when both the media player and the monitor are powered off.• Use an HDMI cable with the HDMI logo.• Some HDMI cables and devices may not display an image correctly due to different HDMI specifications.