4-6 System ConfigurationConfiguration ExamplesThe following describes examples of configuration required to use software-link features or forsystem operations.UPSTo link power supply with the UPS To power on the server when power is supplied from the UPSSelect [Server] - [AC-LINK] - [Power On]. To keep the server off-powered even when power is supplied from the UPS if the POWERswitch was used to power offSelect [Server] - [AC-LINK] - [Last State]. To keep the server off-powered even when power is supplied from the UPSSelect [Server] - [AC-LINK] - [StayOff].KeyboardTo set Num LockSelect [Advanced] - [I/O Device Configuration] - [NumLock]SecurityTo set passwords on the BIOS levelSelect [Security] - [Set Supervisor Password] and enter a password.Select [Security] - [Set User Password] and enter a password.Set Supervisor password first, then User password.Optional PCI–related devicesTo enable Option ROM of the PCI card (option) installed on the serverSelect [Advanced] - [Option ROM Configuration] - [PCI Slot n (….)] - [Enabled].n: Slot number to install the board
