53Projector Adjustment and Connecting5 Press the POWER button on the control panel of your projector three seconds or longer.Projector turns on.The POWER button indicator lights up green after the completion of activation.6 Press the LAMP ON/OFF button on the control panel for five seconds or longer.The lamp is turned on and the screen glows light about 15 seconds later. The LAMP ON/OFF button indicator brinks incycles of 2 (and changes to steady green light 90 seconds later). The douser is closed until the screen glows light (theDOUSER button indicator lights green). When the douser is open, the DOUSER button indicator turns off.3-4. Setting the Date and Time in the ProjectorThe internal clock in the projector operates on coordinated universal time (UTC). You can set the internal projector time to the timein your region by setting the time difference between the standard time in your region and UTC.If you are using DCC, you can easily set the date and time in the projector by reading the date and time settings of the computerwhere DCC is installed. Refer to “Digital Cinema Communicator Installation Manual” for details.
