63Projector Adjustment and Connecting3-9. Connecting the Various Control TerminalFor control, your projector comes with such ports as the PC control terminal and the Ethernet port (RJ-45).PC control terminal (RS-232) Use this terminal when controlling the projector in serial connection from a PC. Use a retailRS-232C straight cable for the connection between the projector and the computer.Ethernet port (LAN) Use this port when controlling the projector in LAN connection from a PC or a cinemaserver. Use a retail LAN cable (10/100Base-T) for the connection between the projector andthe computer after checking with your network administrator.GP I/O3DRS-232USBREMOTE LANRS-232CPC Cinema serverLAN cableNetwork hub/RouterThis completes the adjustment and connection of the projector. Next, set up the projector from the DCC. Refer to the “Digital Cin-ema Communicator Installation Manual” for the procedure.
