NEC NC1000C Installation Manual
                                                                                                 | |
Contents
| 
67LCD Menu4-3. Configuration4-3-1. Lamp SetupAdjustAdjust the lamp output (brightness).← Displays the current output power value (%) when the lamp rated output is 100%.← Displays the current power value (W).NOTE You cannot set the lamp output to below 80.5%.Lamp ModeSelects the lamp to use. When “Dual” is selected, lamp 1 and lamp 2 turn on/off at the same time. When “Lamp 1” or “Lamp 2” isselected, the other lamp is not used.← Displays the currently selected item with asterisk (*).← Displays the setting.Dual Uses lamp 1 and lamp 2 at the same time.Lamp 1 Uses only lamp 1 (lamp 2 is not used).Lamp 2 Uses only lamp 2 (lamp 1 is not used).TIP • If you change the lamp mode while the lamp is on, the changed settings are applied immediately.• If you change the lamp mode while the lamp is off, the changed settings are applied the next time the lamp isturned on.• The LCD screen displays “Lamp Lit Change” if any of the following events occurs when the lamp mode is set to“Dual”.- One of the lamps has failed to turn on when you turn the lamps on- One of the lamps has extinguished while the lamps are onTo once again light a lamp which has failed to turn on or extinguished, press both the LAMP ON/OFF button andthe MENU button three seconds or longer. However, the lamp cannot be turned on again while the LAMP ON/OFFbutton indicator is blinking.NOTE When the lamp mode is changed, the LAMP ON/OFF button indicator blinks green. You cannot change the lampmode while the LAMP ON/OFF button indicator is blinking. Wait until the LAMP ON/OFF button indicator changesfrom blinking to steady on. |
Related manuals for NEC NC1000C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine