81. IntroductionTerminal Panel Features. COmpUTER IN/Component Connector (miniD-Sub 5 pin) (→page 4, )AUDIO IN (Stereo mini Jack) (→page 4, 5, ). COmpUTER IN/Component (R/Cr, G/Y, B/Cb, h,V) Connectors (BNC x 5) (→page 4)AUDIO IN (Stereo mini Jack) (→page 4)3. COmpUTER 3 (DVI-D) IN Connector (4 pin)(hDCp compatible) (→page 5)AUDIO IN (Stereo mini Jack) (→page 5)4. COmpONENT IN (Y, Cb/pb, Cr/pr) Connectors(RCA) (→page )AUDIO L/mONO, R (RCA) (→page )5. S-VIDEO IN Connector (mini DIN 4 pin) (→page8). VIDEO IN Connector (RCA) (→page 8). VIDEO/S-VIDEO AUDIO L/mONO, R (RCA) (→page8)8. mONITOR OUT Connector (mini D-Sub 5 pin)(→page )9. AUDIO OUT (Stereo mini Jack) (→page )0. pC CONTROL port (D-Sub 9 pin) (→page 4, 4)Use this port to connect your PC or control systemto control your projector via a serial cable. Thisenables you to control the projector using serialcommunication protocol. A commercially availableRS232C cross cable is required to use this port. Youcan also control the projector by using PC ControlUtility 3.0 contained on the supplied User Support-ware 5 CD-ROM. To do so you must first have PCControl Utility 3.0 installed on your PC. If you arewriting your own program, typical PC control codesare on page 146.. Remote Jack (Stereo mini Jack) (→page )NOTE: Connecting the remote cable to the REMOTE minijack on the terminal panel will make the wireless operationunavailable.. USB port (Type A) (→page 3)3. LAN port (RJ-45) (→page 9, 05)4. USB Wireless LAN unit (→page 48)NOTE: A dummy cover is provided on this location of theprojector without the USB Wireless LAN Unit.The actual appearance of the terminal panel may differ slightly from that shown in the drawing, but this does not af-fect the projector’s performance.WIRELESSUSB(LAN)WIRELESS147 8 1011134 12 3 2165 9Downloaded From projector-manual.com NEC Manuals
