53. Projecting an Image (Basic Operation) Selecting a SourceSelecting the computer or video sourceDetecting the Signal AutomaticallyPress and hold the SOURCE button for a minimum of 1 second, the projectorwill search for the next available input source. Each time you press and hold theSOURCE button for a minimum of 1 second, the input source will change as fol-lows:COMPUTER1 → COMPUTER2 → COMPUTER3 → COMPONENT → VIDEO→ S-VIDEO → VIEWER → COMPUTER1 → ...If no input signal is present, the input will be skipped. When the input sourceyou wish to project is displayed, release the button.Using the Remote ControlPress any one of the COMPUTER 1/2/3, COMPONENT, VIDEO, S-VIDEO,VIEWER or NETWORK buttons.LASEROFFAUTO ADJ.ONASPECT LAMP MODER-CLICKL-CLICKMOUSEFREEZEPIPVOLUME MAGNIFY PAGEUPDOWNSELECTPOWERPOWERMENUENTEREXITVIDEOS-VIDEOVIEWERNETWORKCOMPUTERCOMPONENT31 2Selecting from Source ListPress and quickly release the SOURCE button on the projector cabinet to dis-play the Source list. Each time the SOURCE button is pressed, the input sourcewill change as follows: “COMPUTER 1/2/3”, “COMPONENT”, “VIDEO” (VCR),“S-VIDEO”, “VIEWER” (slides on a USB memory) or “NETWORK” (LAN port[RJ-45] or installed USB wireless LAN unit).To display the selected source, press the ENTER button.POWERAUTO ADJUSTUSBLAMPSTATUSON/STAND BYSOURCE3D REFORMSELECTPOWERAUTO ADJUSTUSBLAMPSTATUSON/STAND BYSOURCE3D REFORMSELECTDownloaded From projector-manual.com NEC Manuals
