iImportant InformationSafety CautionsPrecautionsPlease read this manual carefully before using your NEC NP4001/NP4000 projector andkeep the manual handy for future reference. Your serial number is located on the bottomof your projector.Record it here:CAUTION:To turn off main power, be sure to remove the plug from power outlet. Thepower outlet socket should be installed as near to the equipment as possible,and should be easily accessible.CAUTION:• TO PREVENT SHOCK, DO NOT OPEN THE CABINET.• THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.• REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This symbol warns the user that un-insulated voltage within the unit may besufficient to cause electrical shock. Therefore, it is dangerous to make anykind of contact with any part inside of the unit.This symbol alerts the user that important information concerning the opera-tion and maintenance of this unit has been provided.The information should be read carefully to avoid problems.WARNING:To prevent fire or shock, do NOT expose this unit to rain or moisture. Do NOT usethis unit’s plug with an extension cord or in an outlet unless all the prongs can befully inserted.DOC Compliance Notice (for Canada only)This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.Machine Noise Information Regulation - 3. GPSGV (for Germany only)The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO7779.Downloaded From projector-manual.com NEC Manuals
