5. Using On-Screen Display66q Source Menu Descriptions and FunctionsThe Source menu displays all supported image sources.Select the required source from the menu using ▲ or ▼ and press Enter to confirm.I TEM DESCRIPTIONComputer 1 Select the source connected to the Computer 1 input(see Connecting Your PC or Macintosh Computer on page 31).Computer 2 Select the source connected to the Computer 2 input(see Connecting Your PC or Macintosh Computer on page 31).Computer 3 Select the source connected to the Computer 3 input(see Connecting Your PC or Macintosh Computer on page 31).ComponentSelect the source connected to the Component input(see Connecting Your DVD Player with Component Output onpage 34).Video Select the source connected to the Video input(see Connecting Your VCR or Laser Disc Player on page 35).S-Video Select the source connected to the S-Video input(see Connecting Your VCR or Laser Disc Player on page 35).Note:If an XGA signal is not correctly recognized on NP4001, set "WXGA Mode" to Off.(see page 72).To check if the signal is recognized, go to "Source" under "Information" menu.(see page 97)Downloaded From projector-manual.com NEC Manuals
