3. Projecting an Image (Basic Operation)39o Selecting a SourceThe Source can be selected from the projector's control panel or from the remote control unit.Refer to the following guide to select Source.1. Press Menu on the OSDcontrol panel or on theremote control unit to dis-play the Main Menu.Scroll to the Source menuusing ▲or▼ and pressEnter.Note:Return to the projectedimage by pressing Exittwice.2. Select the required sourceusing ▲or▼ and pressEnter.Note:If an XGA signal is not correctly recognized on NP4001, set "WXGA Mode" to Off.(see page 72).To check if the signal is recognized, go to "Source" under "Information" menu.(see page 3 97)Downloaded From projector-manual.com NEC Manuals
