4. Convenient Features Using the Supplied Remote Mouse ReceiverThe remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is agreat convenience for your computer-generated presentations.Connecting the remote mouse receiver to your computerIf you wish to use the remote mouse function, connect the mouse receiver and computer.The mouse receiver can be connected directly to the computer’s USB port (type A).NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or changeyour computer settings.30°30°remote mouse receiverComputerto UsB port of PC or MacintoshWhen operating a computer via the remote mouse receiverremote sensor on the remote mouse receiver7m/22 feetWhen connecting using the USB portFor PC, the mouse receiver can only be used with a Windows 98/Me/XP*, Windows 2000, Windows Vista, orMac OS X 10.0.0 or later operating system.* NOTE: In SP1 or older version of Windows XP, if the mouse cursor will not move correctly, do the following:Clear the Enhance pointer precision check box underneath the mouse speed slider in the Mouse Properties dialog box [PointerOptions tab].• The PAGE UP and DOWN buttons do not work with PowerPoint for Macintosh.NOTE: Wait at least 5 seconds after disconnecting the mouse receiver before reconnecting it and vice versa. The computer maynot identify the mouse receiver if it is repeatedly connected and disconnected in rapid intervals.
