1518. User Supportware❸ Operating the Projector Via the LAN (Virtual Remote Tool)This will help you perform operations such as projector’s power on or off and signal selection via a LAN connection. Itis also used to send an image to the projector and register it as the logo data of the projector. After registering it, youcan lock the logo to prevent it from changing.Control FunctionsPower On/Off, signal selection, picture freeze, picture mute, audio mute, Logo transfer to the projector, and remotecontrol operation on your PC.Virtual Remote screenRemote Control Window ToolbarThis section provides an outline of preparation for use of Virtual Remote Tool.For information on how to use Virtual Remote Tool, see Help of Virtual Remote Tool. (→ page 153)NOTE:• Logo data (graphics) that can be sent to the projector with Virtual Remote Tool has the following restrictions:(Only via serial or LAN connection)* File size: Within 256 kilobytes* Image size: Within the resolution of the projector* File format: PNG (Full color)• Logo data (image) sent using the Virtual Remote Tool will be displayed in the center with the surrounding area in black.• To put the default “NEC logo” back in the background logo, you need to register it as the background logo by using the imagefile (PA622U/NP-PA522U: \Logo\necpj_bbwux.png, PA672W/PA572W: \Logo\necpj_bbwx.png, PA722X/NP-PA622X: \Logo\necpj_bb_x.png) included on the supplied NEC Projector CD-ROM.
