514. Multi-Screen ProjectionThings to note when installing projectors• Leave sufficient space on the left and right of the projector so that the air intake and discharge outlets of the projectorare not obstructed. When the air intake and discharge outlet are obstructed, the temperature inside the projectorwill rise and this may result in a malfunction.• Please do not pile up the projectors directly on top of one another when installing them. When the projectors arepiled up on top of one another, they may fall down, resulting in damage and failure.• Installation example when using two projectorsThe following installation is recommended when combining the installation of two projectors for multi-screen projec-tion. Please leave a space of at least 10 cm between the air intake/discharge outlet and the wall.[Installation example]Air intake opening Air discharge outletCabinetCabinetCabinetAir dis-chargeAir intakeFront Right side BackWARNINGPlease request the retail store for special installation services such as when mounting the projector to the ceiling.Never carry out the installation by yourself. The projector may fall down and result in injury. Please use a sturdycabinet that can withstand the weight of the projector for the installation. Please do not pile up the projectors directlyon top of one another.NOTE:• For the range of the projection distance, please refer to the Appendix “Throw distance and screen size”. (→ page 158)
